Microh LED COB100 PAR CWWW Operation & User’s Manual

6, Menu Map The device has two operation modes, It can be operated in Stand Alone or in DMX controlled When in Master/Slave Synchronization Mode, only one in a se- ries chain can be set as the master. STAT A.000 Adjust cold white from 000-255 b.000 Adjust warm white from 000-255 ST.000 Adjust strob…

5, Microh LED COB100 PAR CWWW Operation After you connected the effect to the mains, The xture starts running Stand Alone operation In the stand alone mode, the xture can be used without a dmx controller Master/slave-operation The master/slave-operation enables that several devices can be synchronized and contr…

4, Safety Warning • Every person involved with the installation, operation and maintenance of this device must be qualied. • User/installer must follow the instructions of this manual. • Unqualied persons must not open the housing cover and operate the device, or the dealer will…

9, DMX Modes 4CH Mode Channel Value Function 1 000-255 Master Dimmer (0-100%) 2 000-255 Cool White Dimmer (0-100%) 3 000-255 Warm White Dimmer (0-100%) 4 000-010 No Function 011-255 Strobe (slow to fast) …

8, DMX -512 Control Connections This xture complies with international USITT DMX standards and can be used with a 3 pin DMX connector. Plug in the 3 pin XLR cable to the female 3 pin XLR output of your controller and the other side to the male 3 pin XLR input of the xture. To conn…