Olivetti EXPLOR@ 950 LED Service Manual

37, Peripheral errors Problem Solution Audio • Check that the Audio cable is connected correctly or replace the loudspeakers. COM 1 RS 232/422/485 • Check that the connector of the peripheral is inserted correctly. • If the device connected is powered directly by the serial port, f…

19, Olivetti EXPLOR@ 950 LED 5. Connect heads of all the cables to the ports of the back I/O panel of the POS device. 6. Feed the black head (with power connector) of the VGA cable (item I.) through the 2 nd display support (item C.). 7. Connect the black head (with power connector) and th…

29, BIOS CONFIGURATION Serial Port Configuration 1. Under BIOS screen, use the → or ← key on your computer keyboard to move to the Advanced tab, and t hen use the ↑ or ↓ key on your computer keyboard to select Super I/O Configuration then press ENTER key. 2. Use the �…

17, Pole Type 2nd Display Kit: A. 2 nd Display (8.4” or 10”) G. Base bracket B. 2 nd Display Mount H. Plastic spacer C. 2 nd display support I. M3 screw X 4 D. 2 nd display base J. M4 screw X 2 E. Plastic pole (long) K. USB Cable (for USB type…

13, 4. Finished. B. Customer Display Power Supply Configuration The customer display is driven and powered from the serial port COM6. The serial port COM6 must be appropriately set to provide the 12 V power supply to the customer display. See "Serial Port Configuration&qu…

25, TURN ON THE DEVICE 1. Make sure all peripherals are connected properly. 2. Press and hold the power switch until the power indicator on the front panel glows green. 3. Install the cable cover. Y116500-1 Service Manual 1-19 …