Midtronics TEC-4500 BP Instruction Manual

18, 13 Setting the date and time format (D. SET DATE FORMAT) The default is the current date and time in Central Standard Time (CST). The default format is MM/DD/YY with a 12-hour clock. To set the date and time format in the analyzer: 1. Press or  to scroll to D. SET …

28, 23 Recommendations Recording jar information Because conductance values vary with such factors as age, temperature, and site conditions, record the following about the jars you are testing each time you test: • Power load • Physical condition of the jars • Site condition …

15, 10 Note: The reference values from STRING SUMMARY and the website are guidelines only. Midtronics updates the website with new reference values when they are created. If you create a reference value for a jar model, e-mail the value and information to [email protected] or fax it to 63…

30, 25 Determining a test pattern Introduction Before you attach the cable to the jar, you should determine a pattern for testing to make testing a consistent and fluid process. Posts and straps You must test all posts and straps on a jar before testing the next jar in th…

23, 18 Setting the string temperature (3. TEMP:) To set the temperature of the string: 1. Use the temperature sensor to measure the temperature of one of the jars in the string. 2. Press or  to scroll to selection 3. TEMP: in the SET PARAMETERS and press ENTER. 3. Pr…