Novatel OEM615 Installation And Operation Manual

183, OEM638 Technical Specifications Appendix E OEM6 Family Installation and Operation User Manual Rev 12 183 Figure 92: Example - LED Drive Buffer for PV and ERROR Signals Table 41: Bill of Materials (critical components) E.1.5 Communication Ports COM1, COM2 and IMUCOM (COM6) present so…

182, OEM638 Technical Specifications Appendix E OEM6 Family Installation and Operation User Manual Rev 12 182 E.1.4 Logic-Level I/O The OEM638 provides a number of 3.3 V Logic-level I/O pins for status indication, communication and timing: • PPS: Pulse-Per-Second • VARF: Variable Frequency (a softwa…

22, Novatel OEM615 Introduction Chapter 1 OEM6 Family Installation and Operation User Manual Rev 12 22 1.2.5 OEM638 Receiver The OEM638 has the same form and fit as NovAtel’s OEMV-3™ receivers, with the following features: Figure 5: OEM638 Receiver Board OEM638 technical specifications are provided in App…

76, Operation OEM6 Cards and Enclosures Chapter 4 OEM6 Family Installation and Operation User Manual Rev 12 76 The LED blinks green on and off, approximately once per second, to indicate normal operation. If the indicator is red, the receiver is not working properly. The indicator’s operation is …

67, Operation OEM6 Cards and Enclosures Chapter 4 OEM6 Family Installation and Operation User Manual Rev 12 67 If receiving OmniSTAR HP, the fifth field of the LBANDSTAT log should be 00c2, as shown in the following example: LBANDSTAT COM1 0 81.0 FINESTEERING 1596 235136.000 0000000…

46, Installation FlexPak6 & FlexPak6D Enclosures Chapter 3 OEM6 Family Installation and Operation User Manual Rev 12 46 Figure 18: FlexPak6 Installation Figure 19: FlexPak6D Installation COM1 I/O COM2 Using a coaxial cable, connect the antenna to the port, which is found on the front face of…