Sabre Sabre 30 Owner's Manual

29, 3/21/2017 Sabre 30 Owners Manual 29/81 mast must not alter the original positioning of the halyards with respect to the bolts, or serious chafing and halyard damage may occur. 13:10 STANDING RIGGING LENGTHS Sabre 30 Series I Hull No. 001 to 100 Length Pin to Pin Turnbuckle 2/3 open Length Wire Di…

41, 3/21/2017 Sabre 30 Owners Manual 41/81 CAUTION: Never expose battery to open flame or electric spark. Chemical action generates hydrogen and oxygen which are flammable and explosive. Don't allow battery fluid to contact skin, eyes, fabrics or painted surfaces  fluid is a co…

76, 3/21/2017 Sabre 30 Owners Manual 76/81 VOLVO MD7A ENGINE WIRING HULL 30001 TO 30013 VOLVO MD7A ENGINE WIRING HULL 30014 TO 30023 …

15, 3/21/2017 Sabre 30 Owners Manual 15/81 Engine Model _________________________ Engine Serial No. _______________ Date of Commissioning ________________ Date of Delivery ________________ The following check list should be followed as a part of the minimum dealer commissioning procedure for a Sabre ya…

5, Sabre Sabre 30 3/21/2017 Sabre 30 Owners Manual 19.00 Exhaust System 20.00 Electrical System  12 Volt 21.00 Electrical System  110 Volt 22.00 Lightning Ground System 23.00 Electrolysis Protection 24.00 Fresh Water System 25.00 Drainage System and…

45, 3/21/2017 Sabre 30 Owners Manual 45/81 left. The valve must be opened when using the pump or damage to the pump may occur. The faucet may be lowered or raised by grasping it at it's base and positioning. 24:05 ACCUMULATOR TANK : On systems with pressurized water, an accumulator tank…