RADWAG UYA 4Y Operation & User’s Manual

118, - 118 - - Characteristics of sample's positive errors T: 4,5g – value of positive error T, T Max – permissible number of positive errors T, n – actual number of positive errors T - Characteristics of sample's positive errors 2T 9g - value of positive err…

155, - 155 - 3. Use finger or a thin (but not sharp edged) and soft stylus to press and hold a display area occupied by a cross. After pressing the fifth cross in order, accept the changes by pressing key. Caution: The process can be aborted by pressing Esc key on an external keyboard conn…

184, - 184 - {333} Pipette calibration report: Pressure {334} Pipette calibration report: Water temperature {335} Pipette calibration report: Z coefficient {336} Pipette calibration report: Statistics {337} Pipette calibration report: Measurements and statistics {338} Pip…

15, - 15 - CAUTION: Make sure there is no protective sticker 1 while carrying measurement (see the above diagram). Install components following the above diagram depending on balance’s type. A – standard (UYA and MYA) 2. Anti-draft chamber 3. Weighing pan 4. Glas…

56, - 56 - 16. PARTS COUNTING < Parts counting> is a working mode enabling determination of quantity of small parts with equal weight. Determined mass of a single part is used for the counting procedure. The single part mass may be: • determined from a reference quantity …

114, RADWAG UYA 4Y - 114 - Window for control in progress: Press button to see a window with measurements performed for actual control: Upon control completion, summary of the process is generated, control is automatically saved to database: …