AOpen PT80 Operation & User’s Manual

7, Windows NT 4.0 4. When the Change Display dialog box appears on screen, click Have Disk button and enter D:\Driver\WinNT then click OK. Select the AOpen PT80 Video Accelerator then click OK. 5. After you complete installing display driver, click Close button and restart Windows to enable the…

6, Windows NT 4.0 Caution: • Before installing the Display driver, make sure your Windows NT is installed in VGA mode and work fine. • Please install the Windows NT 4.0 service pack 3 before installing the video driver. Otherwise, the system may cause setup failed and won’t be able to start …

5, Windows 95/98 Setup VGA Driver (Auto Setup) 1. Insert the Installation CD, the AOpen Installation Wizard will appear. You can also run D:\Setup.exe to launch it. Please click VGA Driver to next step. 2. Click Yes when the Confirm Setup dialog box appears. 3. After you complete installin…

3, Windows 95/98 Caution: • Before installing the display driver, make sure your Windows 95/98 is installed in VGA mode and work fine. • To take advantage of all the eatures, please use Win95 OSR2.1 or Win98. Otherwise, you can use OSR2.0 and install the USBSUPP.EXE from Microsoft(http://www.mi…

8, FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installat…

4, AOpen PT80 Windows 95/98 Setup VGA Driver (Manual Setup) 1. Start Win95/98 and insert the Installation CD. 2. Click mouse right button on the desktop and select Properties from the pop-up menu, or double-click on the Display icon from the Control Panel folder. 3. Select Settings->Advanced Propertie…