Digital Monitoring Products XR150 Operation & User’s Manual

64, Digital Monitoring Products XR150 60 XR150/XR350/XR550 User Guide Appendix A Arming and Disarming Event Displays This displays any system area arming or disarming events. Keypad Display Description ARM 5:10P 10/17 WAREHOUSE The Warehouse was armed on October 17 at 5:10 PM. Press any Select key to display the area number and…

24, 20 XR150/XR350/XR550 User Guide Arming and Disarming Disarming During an Alarm 1. While the alarm bell or siren sounds, enter your user code to silence the alarm. The keypad tone silences as soon as the rst key is pressed. For a burglary alarm, the keypad displays IS TH…

12, 8 XR150/XR350/XR550 User Guide Introduction Special Keypad Tones Your keypad also contains a small speaker that alerts you about events as they occur on your system. For burglary alarms, as soon as the rst digit key is pressed to enter a user code, the keypad tone stops. If a …

31, XR150/XR350/XR550 User Guide 27User Menu Under certain conditions, some outputs cannot be turned on. If you select a restricted output, the keypad displays CANNOT TURN ON. Note: Z-Wave Setup will not be available to the user if Outputs On Off is not enabled for the User in User Proles…

28, 24 XR150/XR350/XR550 User Guide User Menu Many system features are programmed into a User Menu that you can access from any keypad. The menu requires you to enter your user code and then it only shows those functions to which you have access. Accessing the User Menu 1. Press the COMMAND ke…

36, 32 XR150/XR350/XR550 User Guide User Menu Transfer Controller (XFER) This option allows the transfer of all existing Z-Wave devices that are currently programmed in another manufacturer’s Z-Wave portable controller to your system. This operation will overwrite all Z-Wav…