Dingo Tools 65CC Downloadable User Manual

4, Dingo Tools 65CC 4 WHAT IS IN YOUR BOX. STANDARD COMPONENTS A. Bolts and drop pins B. Augers 200mm C. Motor D1. Extension arms 800mm D2. Extension arms 800mm D3. Extension arms 800mm A A A B C D1 D2 D3 …

6, 6 OPERATION FILING GAS TANK 1. Shut off engine and allow engine to completely cool before refilling the gas tank. (Show Picture Of Off button on Engine) 2. Move to a well ventilated area, outdoors, away from flames and sparks. 3. Clean debris from area around the gas cap 4. …

8, 8 WARM ENGINE START 1. Open gas cap vent screw all the way (counter clockwise) 2. Move choke lever to CHOKE or ON position NOTE: CHOKE position is defined by moving the choke lever as far to the ON position as possible. 3. Continue with Step 5 of Cold Engine Starting HOT ENGINE START 1. Ope…

7, 7 EASY TO FOLLOW STARTING SEQUENCE STEP 1 Open gas cap vent all of the way. STEP 4 Move choke lever to CHOKE or ON position. NOTE: CHOKE position is defi ned by moving the choke lever as far to the ON position as possible. STEP 7 Squeeze throttle trigger. STEP 13 Pull the recoil starte…

5, 5 HOW TO MIX YOUR FUEL Common mixtures are 25:1/30:1. If you fi nd your machine is too smoky please use the higher ratio which is 30:1 as seen in diagram C. WHAT IS 25:1/30:1? The fi rst part of the formula refers to how many parts of fuel as seen in diagram A. The second part of th…