Fright Ideas PicoBoo AC Operating Manual

3, PicoBoo AC Operating Manual - page 3 Getting Set Up for Recording Audio To begin recording you will need the following connected to the PicoBoo: • A powered speaker or speakers connected to the PicoBoo’s Audio Line-Out. • An audio source such as an iPod, Computer, or CD p…

7, PicoBoo AC Operating Manual - page 7 Setting the Input Type to Normally-Closed or Normally-Open 1. Power down the PicoBoo, wait 10 seconds. 2. Hold the “1” and “2” buttons to set the input to normally-closed, or just “1” to set it to normally-open. 3. Power up the PicoBoo…

5, Fright Ideas PicoBoo AC PicoBoo AC Operating Manual - page 5 Connecting the Outputs The outlet receptacle on the PicoBoo is split into two separate outputs. Turning on output 1 will turn on the left side, while turning on output 2 will turn on the right. Pretty much anything that plugs into…

1, PicoBoo AC OPERATING MANUAL V1.1 (Sep 8, 2011) 6 Oakside Court Barrie, Ontario L4N 5V5 Tel: 1-877-815-5744 or 905-803-9274 www.frightideas.com …

4, PicoBoo AC Operating Manual - page 4 Recording the Audio The ambient sound must always be recorded first. Once you are happy with how it sounds you can move on to recording the scare sound. The scare sound can then be recorded and re-recorded as needed. If the ambient …

6, PicoBoo AC Operating Manual - page 6 Wiring the Trigger The PicoBoos are designed to work with low-voltage sensors or contact closures only. DO NOT use typical outdoor motion sensors found at local hardware stores. The PicoBoo will trigger when the IN terminal is connected …