Aperion Audio Intimus Series Owner's Manual

20, 18 Subwoofer Specifications: Aperion Audio Intimus S8-APR Powered Subwoofer Frequency response: 35hz to 180hz Amplifier power output: 150 watts (RMS) Speaker enclosure type: Sealed Passive Radiating Design Variable crossover range: 40-180hz Phase adjustment: 0 or 180 Degrees Volume control:…

13, Speaker Level Subwoofer Connection If you do not have a “sub- out” connection, or you choose to use speaker- level connections, you will need a pair of speaker wires (16 gauge or better) to run from your amp or receiver to the subwoofer speaker level inputs. Then you’ll need a…

16, 14 522D-PT Power Tower Setup Connecting Your Power Towers You will notice that there is only one set of speaker level inputs on the back of your power tower (PT). This is because your 522D-PT Power Towers are designed to be used as full-range speakers. For best performance, a full-range s…

1, Owner’s Manual Intimus Series Loudspeakers 522D-LR Bookshelf Speakers 522D-C Center Channel 522D-VAC Vertical Array Center Channel 522D-SS Dipole/Bipole Surround Speakers 522D-PT Power Towers S8-APR Subwoofer S-10 Subwoofer S-12 Subwoofer © 2004 Aperion Audio, all rights reserved. Revis…

9, Aperion Audio Intimus Series 522D-SS Dipole/Bipole Speaker Placement Your 522D-SS speakers are designed for use as surround speakers in a multi-channel home theater setup. When used as surrounds in the dipole mode, they usually perform best when placed on the side walls directly across or slightly behind the seated liste…

14, 12 Setting the Aperion Audio Intimus S8-APR Subwoofer In addition to the high and low-level speaker connections on the rear of your subwoofer, you will see two round knobs and three switches. The first knob, labeled “level,” controls the subwoofer’s volume. The second knob, “crossover fr…