DURKOPP ADLER 559 - Operating Instructions Manual

3, Foreword This instruction manual is intended to help the user to become familiar with the machine and take advantage of its application possibilities in accordance with the recommendations. The instruction manual contains important information on how to operate the machine securel…

26, 10.4.3 List of menu and submenu items Menu item Description 100 Buttonhole number: up to 5 different buttonholes can be programmed. 110 Taper tack selection: buttonholes with taper tack (1), cross tack (2), round tack (3), and without taper tack (0) can be programmed. 120 Length a djustments 121 Se…

18, DURKOPP ADLER 559 - Looper thread tension – Swivel the machine head up. – Adjust the looper thread tension by means of tension 1. Turn the tension in clockwise direction in order to increase the looper thread tension. Turn the tension counter-clockwise in order to reduce the looper thread tension. – Swi…

17, 5. Thread tension 5.1 Needle thread and looper thread tension The thread tensions are dependent on the type and quality of the threads and fabrics. The buttonhole looks best if it is s ewn with the lowest possible thread tension. Too tight thread tensions can lead to undesired ruffling and …

31, 10.6 Sewing The sewing operation can be controlled either by push button or with the keys “OK” and “ESC” at the control panel. Sew ing w ith the push button With the push button the clamps can be controlled and the sewing operation started. According to the adjustment in the service …

8, – Pneumatic cutting open of the buttonhole. – Automatic adaptation of the cutting power of the buttonhole knife dependent on the programmed buttonhole length. – Due to the vertically working cutting block support no follow-up work required in case of different cutting block heights. – Ce…