Fenix ECOSTATIC WMX706 Installation And Operating Instructions Manual

6, OPERATING INSTRUCTIONS This storage heater takes in Energy when electricity tariffs are low and dissipates it when tariffs are normal. OPERATION SAFETY INSTRUCTIONS 1. Ventilate rooms well during commissioning 2. Do not move the heater in any way once installed without the services of a competent …

3, ECOSTATIC WMX MANUAL STORAGE HEATER RANGE MODELS: WMX706 - 6kWh WMX712 - 12kWh WMX718 - 18kWh WMX724 - 24kWh INSTALLATION AND OPERATING INSTRUCTIONS IMPORTANT PLEASE READ THIS LEAFLET CAREFULLY AND RETAIN FOR FURTHER USE. NOTE ALSO THE INFORMATION GIVEN ON THE HEATER The instal…

5, THE FOLLOWING MUST BE APPLIED WHEN FIXING THE HEATER TO THE WALL BRACKET 6. 6. i) If no skirting board is present secure the heater through the wall bracket slots closest to the wall. ii) If 100mm (4in.) skirting is present secure the heater through the outer slots. iii)If skirting …

8, Fenix Trading s.r.o. Slezská 2, 790 01 Jeseník Czech Republic tel.: +420 584 495 304 fax: +420 584 495 303 e-mail: [email protected] www.fenixgroup.cz …

4, INSTALLATION INSTRUCTIONS PREPARATION The heater will arrive separately from its storage bricks, the following bricks will be required: Model 706 - 4 bricks Model 712 - 8 bricks Model 718 - 12 bricks Model 724 - 16 bricks Only heat resisting cable (min. rating T85) should be used. The wires in …