EXP Computer CD421 Installation Manual

19, - - 14 In this case, double click on the PCMCIA Controller, and a dialog box will be displayed as below. Please place a check mark next to the current configuration of Device usage box, then select OK. Figure 10 After the PCMCIA 32-Bit Card support is installed, Windows will ask you to reb…

20, - - 15 SOFTWARE INSTALLATION FOR OS/2 WARP Before installing CD-421 device driver for OS/2 WARP, make sure your computer is PCMCIA supported. If you are not sure about this, please refer to the last part of this section for “Adding PCMCIA Support”. AUTOMATIC INSTALLATION To perfor…

9, EXP Computer CD421 - - 4 POWER SOURCE The CD-421 can be either powered by the AC adapter or by the batteries as a flexible option. However, the AC adapter has a priority over the battery in powering the CD-ROM. That means if you connect the AC adapter, the CD-421 will operate on it regardless if…

15, - - 10 4. Add the following line at the TOP of your AUTOEXEC.BAT: drive:\path\MSCDEX.EXE /D:MSCD001 /M:4 where drive:\path specifies the DOS directory or the directory containing the file MSCDEX.EXE. Note: If your AUTOEXEC.BAT file loads a menu program such as DOSSHELL or Windows, you h…

7, - - 2 PART NAMES AND FUNCTIONS FRONT PANEL OF THE CD-ROM DRIVE •• Disc Tray: This disc tray is used to insert the compact disc. ‚‚ Load/Stop button: • Press this button to load the disc tray. • When playing an Audio CD, pressing this button will put it into the stop …

33, - - 28 POWER SAVING The CD-421 may operate with an AC adapter or batteries. Use of the supplied AC Adapter will provide the power for use as a portable CD player, or to extend the computer’s battery life. The CD-421 drive will automatically enter the sleep mode (spindle off) whe…