Ganz Thermal Series Operation & User’s Manual

9, Ganz Thermal Series User Manual vii Figure 47: Restart Camera .......................................................................................................................... 47 Figure 48: Restore Factory Defaults .............................................................…

44, Ganz Thermal Series User Manual 29 5.2.1.3 Ping Target The camera will allow the user to Ping a Target device. This is useful when trying to configure the FTP server or SMTP server. You can both verify network connectivity and server connectivity. To ping a target, simply en…

66, Ganz Thermal Series User Manual 51 7.6.3 Constant Recording The administrator can enable or disable the recording of video (to the camera’s internal memory) by clicking on the toggle button. If the Constant Recording is disabled, no additional videos will show up on the video s…

23, Ganz Thermal Series Ganz Thermal Series User Manual 8 3.2 RANGE PERFORMANCE The ZNT6-Hxx1 and ZNT6-Hxx2 range data assumptions and performance is provided below. Typical detection and recognition range performance has been modeled for multiple available lens solutions using NVTHERM 1 . See Figure 3 …

4, Ganz Thermal Series User Manual ii CBC AMERICA INC. END USER LICENSE AGREEMENT FOR GANZ THERMAL SERIES OF PRODUCTS …

17, Ganz Thermal Series User Manual 2 2 P RODUCT O VERVIEW 2.1 IP CAMERA OVERVIEW This manual applies to the following products: Ganz Thermal ZNT6-H Series 30 Hz Ganz Thermal ZNT6-H Series 9 Hz This chapter provides an overview of the Ganz Thermal Series of Fixed Mount, Fixed…