Flymo Sabre Trim Original Instructions Manual

6, Manual line feed S manual line feed button To manually feed the nylon line (S) 1. If required line can be fed out manually. 2. To operate, press and release manual line feed button, whilst gently pulling on the line until it reaches the line cutter. 3. If the line extends past the line cutter…

1, Flymo Sabre Trim ® IMPORTANT INFORMATION Read before use & retain for future reference Sabre Trim Original Instructions …

4, Assembly Instructions con’t Auto Line Feed System To adjust the Sabre handle length 1. Loosen the Sabre Handle collar. (G1) 2. Adjust length of the handle to the most comfort- able operating position (G2). 3. Re-tighten the Sabre Handle collar. G2 G1 Sabre Handle Length Adjustment H line cutte…

3, ted correctly. Use 1. Use the trimmer only in daylight or good artificial light. 2. Avoid operating your trimmer in wet grass, where feasi- ble. 3. Take care in wet grass, you may lose your footing. 4. On slopes, be extra careful of your footing and wear non-slip footwear. 5. Do not walk bac…

8, Fault Finding Chart FAULT CHECK ACTION Is the automatic line feed work- ing? Manually feed out line. SEE “MANUAL LINE FEED” Is the line fed out and visible? Has line been removed from cleat? Remove cap and spool, free line and re-fit spool and cap. SEE “CUT- TING HEAD” The line may be j…