iSolutions DMX512 Operation & User’s Manual

10, 18E 6. Troubleshooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A. The unit does not work, no light and the fan does not work 1. Check the connect power and main fuse. 2. Measure the mains voltage …

8, 14E Stand by Blackout the unit Function Strobe 1. Color sync. strobe 2. Sync. strobe 3. Two-light strobe X/Y moving show pattern selection ( Show 1 ~ Show 4 ) Please refer to 4.2. Main Functions- Show mode Color selection X/Y moving setting 1.Pan position 2…

4, 6E 3. Lamp Because of its high internal pressure, there might be a risk that the Discharge lamp would explode during operation. The lamp emits intense UV radiation which is harmful to the eyes and skin. The high luminance of the arc can cause severe damage to the reti…

5, iSolutions DMX512 8E 4.2. Main Function To select any of the pre-set functions, press the MENU button up to when the required one is shown on the display. Select the function by ENTER button and the display will blink. Use DOWN and UP button to change the mode. Once the required mode …

1, User Guide Please read these instructions carefully before use 1E TABLE OF CONTENTS 1. Safety Instruction 2. Technical Specification 3. Lamp 4. How To Set The Unit 4.1 Control Panel 4.2 Main Function 4.3 Home Position Adjustment 5. How T…

6, 10E Blackout Mode Press the MENU button up to when the is shown on the display. Pressing ENTER button and the display will blink. Use DOWN and UP button to select the (yes blackout) or (no blackout) mode. Once the mode has been selected, press the ENTER button to s…