Janome SEW MINI DELUX Service Manual

2, Janome SEW MINI DELUX CONTENTS SERVICE ACCESS (1) FACE COVER .................................................................................................................... 1 SERVICE ACCESS (2) FRONT COVER ........................................................................................…

7, 5 Sew Mini TO ADJUST 1. Remove the front cover. 2. Set the pattern selector dial at maximum zigzag width ( ). 3. Loosen two setscrews. 4. Adjust the needle swing by turning the handwheel, while holding the worm so as not to rotate it, until the needle swing starts at 1.2mm…

6, 4 Sew Mini ADJUSTING NEEDLE DROP POSITION The clearance between the needle and side edges of the needle hole should be 0.2 mm or more when the maximum width zigzag stitch ( ) is selecte. And the neddle should drop in the center of the needle hole when the straight stitch is ( ) selec…

11, 9 Sew Mini ADJUSTING STITCH LENGTH When select the maximum stitch ( ), stitch length should be 3.0mm. 1. Set the pattern selector dial at maximum stitch length ( ). 2. If the stitch length is longer than 3.0mm, turn the adjusting screw in the direction (A). If the stitch length is…