Janome Skyline S7 Manual, Instruction Book

45, 43 To sew another buttonhole in a different size press the X key on the dialog box. NOTE: To cut the buttonhole opening, refer to the instructions on page 39. The memorized length will be cancelled if the presser foot is raised or the startover key is pressed before buttonhole is complet…

6, 4 Standard Accessories Zigzag foot A (set on the machine) Overedge foot M Satin stitch foot F Blind hemming foot G Zipper foot E Automatic buttonhole foot R Stabilizer plate Rolled hem foot D Open toe satin stitch foot F2 Darning foot PD-H Free motion quilting closed-toe foot QC Free moti…

14, 12 z x c v Inserting the bobbin z Press the lockout key. Place a bobbin in the bobbin holder with the thread running off counterclockwise as shown on the hook cover plate. q Lockout key w End of thread e Bobbin holder r Hook cover plate x Hold th…

38, 36 BUTTONHOLES AND SPECIALTY STITCHES Variety of Buttonholes B1 Sensor (Square) buttonhole This square buttonhole is widely used on medium to heavy weight fabrics. The buttonhole size is automatically determined by placing a button in the foot. B2 Auto (Square) buttonhole This is also a…

19, Janome Skyline S7 17 Replacing the Presser Foot CAUTION: Always make sure to press the lockout key to before replacing the presser foot. Use the proper foot for the selected pattern. The wrong foot can cause the needle to break. Raise the needle by pressing the needle up/down button. Press the lockout…