JCM Triton Instruction Manual

12, 12 Please note that the handle fitted is dependent on the size of the chair. You therefore need to ensure the size label on the handle matches the size of the chair being used. ! • Position the seating unit above the interface plate, lining up the locating lugs (B) with the cu…

19, 19 Hip Pad Adjustment Hip Pad Width • Loosen Locking Bolt A by one full turn using the 4mm Allen Key Provided • The Hip Pad can now be freely moved along the width adjustment rail B. • Set the desired position and then re-lock the fixing screw to secure the pad in place. Hip Pad Angle…

31, JCM Triton 31 Servicing via Approved Repairer What should be completed during a service? A service is a comprehensive combination of inspection, maintenance and repair or replacement of worn, faulty or missing components. The growth and any changes of the occupants needs since the original assessmen…

15, 15 5 Star Base Adjustments To Raise The Chair • Located at the back of the chair beneath the base locate the handle (A) and continuously push down to raise the height. • The seat height will raise with additional assistance required, dependent upon the weight of the user. • Re…

28, 28 Setting the Strength of Resistance & Power of Return For maximum performance and comfort, it is necessary to adjust the strength of resistance and power of return of the dynamic mechanism. The resistance is adjusted by varying the air pressure and should be determined by the user’s weig…

6, 6 • Ensure all adjustment mechanisms are secure and in place before operation. If it is likely that the hand-wheels will be repeatedly loosened, JCM can supply allen key bolts as an alternative. We strongly recommend this if there is a danger from those in the vicinity of th…