JR ProPo XG11MV Operation Manual

49, 47 ⿟ “Calibration for 3 Axis Gyros” The JR 3 Axis Gyro system (TAGS01 or TAGS mini) as used for Flybarless R/C helicopters requires “CALIBRATION” prior to ying. This is required to recognize the type of CCPM being employed, and learn the servo travel ranges used. Calibr…

104, 102 ▋Swash▋type【SWASH▋TYPE】 ▋▋Function▋Explanation This function allows electronic CCPM mixing to match the mechanical structure and control of the helicopter swash plate. After making the SWASH TYPE selection, detailed settings should be made using Swash Mixing in the …

56, 54 ▋FLAP▋SYSTEM【FLAP▋SYSTEM】 ▋▋Function▋Explanation The flaps can be controlled in three stages using a switch. A flap delay is also possible. Additionally, there is a function that carries out mixing to the elevators. There is also an Auto Throttle function…

14, JR ProPo XG11MV 12 ▋Using▋the▋transmitter▋and▋receiver▋ Receiver▋mounting▋location ▋▋ Please▋set▋up▋the▋antenna▋direction▋as▋shown▋in▋the▋following▋drawing. The 2.4GHz band radio waves are very directional. The receiver signal is very dependant on the d…

21, 19 ▋Names▋of▋Each▋Transmitter▋Control ▋▋Helicopter▋Type JR gives each switch or lever a name rather than a number on the transmitter. The names and positions are different depending on the model type. Please note this when reading the manual. Functions▋Common▋to▋All▋M…

72, 70 ▋Rudder▋to▋Spoiler▋Mixing▋ 【RUDD → SPOI▋MIX】 ▋▋Function▋Explanation This function emulates rudder operation using spoilers when the aircraft is equipped with dual spoilers. This yaw method is also known as drag rudder. According to the rudder operation, the left…