Idis DC-T1232WR Operation Manual

23, Part 3 - Remote Setup 23 Bandwidth Control Regulates the camera's network bandwidth use based on network traffic fluctuations. Select Network Bandwidth limit and then specify the maximum bandwidth. The camera will not be able to use more than the specified limit in the event …

8, Part 1 – Introduction 8 Accessories Upon purchasing the product, check inside the box to make sure all the following accessories are included. External appearances and colors of the accessories may vary depending on the model. Network Camera Mounting Bracket Camera Sun Shield …

21, Part 3 - Remote Setup 21 • Use FEN is a feature that allows you to register a unique name for a camera that utilizes a dynamic IP address to the FEN Server and connect to the camera using the registered name instead of an IP address, which can change from time to time. In order…

19, Idis DC-T1232WR Part 3 - Remote Setup 19 User/Group • User/Group: Change remote camera control permission settings for users and user groups. - Add Group: Add a new user group. Designate a name for the group and then specify control authorities. - Add User: Add a new user. Designate a name fo…

29, Part 3 - Remote Setup 29 Privacy Masking Select Privacy Masking to set up a privacy mask over a specific area. The section on which a privacy mask is applied will appear as black when monitoring video. • Privacy Masking Setup: Set up privacy masks. (Up to 16) - (Select)/ (Unselect):…

34, Part 3 - Remote Setup 34 DC-T1234WR model DC-T1233WHR model • Sensitivity: Select daytime and nighttime motion detection sensitivity levels. Higher values will result in more sensitive motion detection. • Minimum Blocks for Detection: Select minimum blocks for daytime and n…