HOLOPHANE Enduration Instruction Manual

1, HOLOPHANE Enduration HOLOPHANE ® ENDURATRON ® Installation and Maintenance Manual GR1692 GR1791 AFTER INSTALLATION DELIVER THIS MANUAL TO OWNER IM-274-E 1 IMPORTANT SAFETY INSTRUCTIONS WARNING – READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL OR MAINTAIN THIS…

2, IM-274-E 2 1 INTRODUCTION 1.1 Product Description. The Enduratron lighting fixture has been listed to applicable U.S. and Canadian safety standards by Underwriters Laboratories Inc. 1.2 Alternate Information Sources: Holophane Field Service Department P.O. Box 3004 New…

3, IM-274-E 3 Figure 2 SUPPLY CONNECTIONS WIREWAY COVER 2X SCREWS GR1792 2.3 Options Installations: 2.3.1 Safety Chain Option Installation: • Use 3/8 socket driver to drive the screw until it seats firmly against the washer and chain link see Figure 3. • Attac…

4, IM-274-E 4 • Brush off loose dirt and debris. The optical assembly may be cleaned with water and detergent to return it to maximum optical performance. Dry the assembly with a clean cloth. • Check the exterior of the housing for evidence of damage or potentially hazardou…

5, IM-274-E 5 Figure 5 – Standard Construction 2X SCREWS ELECTRICAL ASSEMBLY OPTIC ASSEMBLY GR1794 Figure 6 3X SCREWS (APPLY TORQUE 55-65 IN-IB) BOTTOM RING ELECTRICAL ASSEMBLY 3X ARCH ROD TOP RING OPTIC GR1795 Figure 8 – Indiviual Sensored Highbay Dimming ISHB DIMMING ORIENTA…

6, IM-274-E 6 Trouble Shooting Guide Problem Possible Cause Remedy Lamp does not start • Lamp has failed at end of life • Replace Lamp • Lamp is slow starting due to age • Ballast failure • Wait 1 hour – Replace lamp if it does not start • Replace b…