GMP EXCELMASTER-1600 Operation & User’s Manual

3, 3 IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO GBC. IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT, YOU WILL FIND IMPORTANT SAFETY MESSAGES REGARDING THE PRODUCT. READ THESE MESSAGES CAREFULLY. READ ALL OF THE INSTRUC- TIONS AND SAVE THESE…

12, GMP EXCELMASTER-1600 12 O. REWIND SHAFT: (Figure 18) The rewind shaft holds the rewind tube on the machine. P. REWIND TUBE: (Figure 18) The two rewind tubes located at the front of the machine are used to rewind release liners. The one located at the rear of the machine is used to rewind the finished product. Q. RE…

2, 2 TABLE OF CONTENT Cover 1 Table of Content 2 Important Safety Instructions 3 Specifications 4 Pre-Installation 5 Installation 6 Control Guide 7 Power ON/ OFF 7 Control Panel Display 7 Control Panel 7 Rewinder Selection Switch 8 Upper Rewinder Direction Switch 9 Lower Rewinder Direction Swit…

14, 14 LOADING TOP THERMAL FILM This procedure describes how to load the upper roll of film onto the laminator. Figure 23 uses poly-in film and the upper rear unwind/ rewind position for illustration purpose. 1. Turn the Power ON/OFF to on (I). Set top heat temperature for the film type you are usin…

6, 6 INSTALLATION 1. Shipping damage should be brought to the immediate attention of the delivering carrier. 2. With assistance, carefully roll the laminator into position over flat and even surfaces. 3. The laminator should be positioned to allow exiting film to flow freely to the floor or a work ta…