Harper 5400 Operator's Manual

33, Chipper/Shredder R R 29 ROTOR 905008 SHREDDER KNIFE KIT 1 2 3 4 5 6 7 8 9 10 ITEM # 5 8 9 7 1 2 3 4 10 6 905007 CHIPPER KNIFE KIT 1 2 ITEM # CHIPPER KNIFE BOLT, 5/16-18 X 1.0, HHCS 4 1 2 NOTE: Replace shredder knives and spacers in the same manner they are removed. This will elimina…

18, Harper 5400 Chipper/Shredder R R SAFETY WARNING! • Before servicing or inspecting the Chipper/Shredder, make sure the power source is shut off and all moving parts have stopped. • Disconnect the spark plug wire from the spark plug on Gas Pow- ered units. On PTO Powered…

19, Chipper/Shredder R R Setting Clearance: 1. Remove safety shields covering the drive pulley on the rotor shaft front. 2. Remove safety cover on rotor shaft rear side. 3. Loosen screws on the rotor shaft pulley. 4. Loosen set screws on front and rear rotor bearing lock collars. 5. Us…

8, Chipper/Shredder R R Gasoline SAFETY WARNING! Gasoline is extremely ammable and can be highly explosive. Always keep a re extinguisher near the Chipper/Shredder during operation. • Always use an approved container for gasoline. • Avoid open ames or sparks while doin…

6, Chipper/Shredder R R Specications Torque Chart Hopper Size 34” x 21” Chipper Plate ¾ thick machined and balanced steel plate Chipper Knives 4 knives machined from tool steel Chipper Chute 33”L x 13”W x 12”H Chipper Capacity 5” maximum diameter material Rotor 18” diameter wi…