Hasselblad H4D-200MS Operation & User’s Manual

16, 16 H4D Typical camera grip display when changing settings. Command indication The upper row on the screens describes commands (which change according to the setting). The button immediately above each command effects the change. So in this case, for example, you would press the FLASH …

27, Hasselblad H4D-200MS 27 H4D 9 Rechargeable battery grip – precautions: The following precautions should be followed: • Connectthebatterygriptothecameracorrectly. • Keeptheprotectivecoverinplacewhennotinuse.(Short-circuitingacrosskeysinapocket…

20, 20 H4D Buttons and controls − details Shutter release button A This button has half-press and full-press positions. By pressing half-way (or softly) the camera, auto focus function and exposure meter can be activated. By pressing all the way down (or more firmly) the shutter will…

70, 70 H4D Thumbnailviews Preview thumbnails are small versions of each preview, sized to fit either four or nine images on the screen at once. Use them to get an overview of your work so far and to help find specific shots. To see the thumbnails, start with the standard preview display and …

93, 93 H4D      Camera The Camera setting automatically corresponds to an H4D body in normal use. However, when the sensor unit is attached to a large format/view camera then other settings must be manually made. See under SU-ViewCameras for further information. A…

119, 119 H4D The H4D can be used together with most flash units in manual mode. However, to make use of a TTL automatic function, you must ensure the flash unit is compatible with the SCA 3002 system. Connection is either by the PC socket or by the hot shoe (see warning note below).…