Hawkeye Mfg FishTrax FT1PXC Operation Manual

8, - 8 - 1. Clear away snow to expose the ice surface. 2. Place a small amount of liquid water on the ice and set the sonar sensor on the water allowing the Sonar Sensor to freeze to the ice. 3. If there are any air pockets between the sonar sensor and ice, or the water below the ice, t…

12, - 12 - FISHTRAX™ SONAR FREQUENCIES User selectable dual beam FishTrax™ Intelligent Sonar allows you to fine tune the FishTrax™ 1C to adapt to your fishing style. There are two operating frequencies (200 kHz and 83 kHz), each specifically designed to make finding fish …

17, Hawkeye Mfg FishTrax FT1PXC - 17 - 4. Press and release the V | ESC button to exit the menu and return to the fish finder mode. NOTICE: The Depth Range setting is an advanced feature. For best results it should be set to AUTO. Only change the setting if you are only interested in sonar echoes in a spec…

14, - 14 - ACCESSING AND ADJUSTING THE FEATURES There are many features incorporated into the FishTrax™ 1C that allow you to fine tune the fish finder for your specific needs. SONAR A. Screen Detail (Sensitivity) B. Depth Range C. Upper and Lower Limits (Zooming) D. FishTarget™ (…

15, - 15 - The Menu System Has 3 Tabs: • Sonar • Setup • Advance To cycle through the Menu System tabs press and release the button. In each menu tab use the  or  buttons to select a specific menu item, and use the  or  buttons to change a me…

2, - 2 - SAFETY INFORMATION • Periodically wipe the face with a dry cloth. Do not use abrasives or solvents on this device. • Only qualified personnel should perform repairs or servicing not covered in this manual. • The LCD used in the product is made of glass. T…