Hedman HF200 Operating & Service Manual

6, AUTOMATIC FOLDING (Stack of sheets up to 5/8" (16 mm) high) 6 3. Slide PAPER GUIDES snugly against stack. 2. Center paper on FEED TABLE and release HOPPER LEVER. 1. Hold HOPPER LEVER open (right) and load neatly stacked and squared paper into HOPPER. 4. Position RECEIVING RACK by plac…

11, 11 MAINTENANCE Removing CARTRIDGE WARNING: Turn POWER SWITCH off and unplug POWER CORD before removing CARTRIDGE. To Remove CARTRIDGE: 1. Open TOP and INNER COVERS. 2. Pull back RED PRESSURE LEVERS. 3. Remove CARTRIDGE by sliding it up and out of the folder in the slot. When installing CART…

1, Printed in U.S.A. Form No.198496HF HEDMAN ® Form No.198496HF HF200 FOLDER OPERATING & SERVICE MANUAL THE HEDMAN COMPANY 189 Gordon St. Elk Grove Village, IL 60007 800-872-2788 The HEDMAN Company • 189 Gordon St. • Elk Grove Village, IL 60007 • 800-872-2788 ABC Office 1142 West…

12, Hedman HF200 1312 The SEPARATOR must be set to feed one sheet of paper at a time. WARNING: Turn POWER SWITCH off and unplug POWER CORD before making adjustment. To adjust SEPARATOR: 1. Clean FEED ROLLER before adjusting SEPARATOR. (Refer to page 12.) 2. Fold a strip of standard (20# bond) paper in half. H…

2, 2 TABLE OF CONTENTS Page 4 SPECIFICATIONS 5 COMPONENTS & CONTROLS 6 AUTOMATIC FOLDING 7 MANUAL FOLDING 8 CUSTOM "C" FOLD 9 CUSTOM "Z" FOLD 10 CUSTOM "HALF" FOLD 11-13 MAINTENANCE 11 Removing Cartridge 12 Cleaning Feed Roller 13 Adjusting Separator 14-15 SERVICE 14…

3, 3 22 TROUBLESHOOTING 1. FOLD QUALITY A. Documents skew - crooked folds 1. As folder runs, adjust PAPER GUIDES slightly to correct the skew. 2. Re-position paper in HOPPER. Hold HOPPER LEVER open and load paper squarely and centered. Slowly release HOPPER LEVER. 3. Too much paper i…