Argus DC3810 Operation & User’s Manual

116, 116 NO YES DATE/TIME (For setting or correcting the date and time, see page 121) DATE TIME YY/MM/DD HH:MM BEEP (For turning on or off the beep, see page 123) ON (The beep sounds.) OFF (The beep does not sound.) VIDEO OUT (For switching the video signal from the video-out terminal, see page 125…

27, Argus DC3810 27 CHECKING THE BATTERY POWER When the batteries are installed in the camera, the camera checks the battery power automatically and shows the result on the data panel. Battery power is no longer at peak performance and should be monitored. Batteri…

123, 123 SETTING THE BEEP SOUND A beep or "chime" sounds at each touch of a button or twist of the function dial. The chime can easily be turned off manually by following these simple steps: 1 With the camera turned on, rotate the function dial…

80, 80 1 With the camera turned on, rotate the function dial to . 2 Press or to scroll through images. SINGLE-FRAME PLAY Images recorded on the CF card can be displayed on the LCD monitor one at a time. …

84, 84 2 Press to scroll to the desired image. If there are more than nine photos recorded: • When the ninth frame is selected (lower right) and the button is pressed, frames 10 - 18 will appear. • To go back to your previous nine frames, simply select the uppe…

117, 117 1 With the camera turned on, rotate the function dial to "SETUP". 2 Press or to highlight [POWER SAVE]. Press once. SPECIFYING THE TIME FOR THE AUTO POWER OFF FUNCTION To conserve battery life, this camera…