Glidecam Industries XR-1000 Set Up And Operation Manual

10, 18 #5 BALANCING YOUR GLIDECAM XR-SERIES Figure 42 Before you begin the balancing process check for the following: 1) Camera is securely attached to HEAD PLATE. 2) Lens cap has been removed. 3) Camera battery is connected. 4) Flip out LCD is in it’s operating position. (if applicable) 5) Teles…

13, #7 OPERATING YOUR GLIDECAM XR-SERIES Figure 52 The Glidecam XR-SERIES is designed to work correctly only when operated with two hands. (see Figures 51 and 52) One being the holding hand and the other being the guiding hand. If you try to operate the unit with just your holdin…

11, 2120 Figure 45 If the XR-SERIES leans to the right, then you will have to loosen up the BLACK THUMB SCREWS on the bottom of the BOTTOM PLATE and gently slide the MID PLATE over to the left a bit. If the XR-SERIES leans to the left, then move the MID PLATE to the right. Always secu…

5, Figure 12 First, Get the BASE PLATFORM and the TELESCOPING POST. See Figures 7 and 12 for BASE PLATFORM & Figures 8 and 13 for TELESCOPING POST. #3 ASSEMBLING YOUR GLIDECAM XR-SERIES Figure 13 Note the threaded insert located in the bottom the of TELESCOPING POST. 8 9 Note the threade…

12, Glidecam Industries XR-1000 Figure 49 To test the balance of the vertical axis, perform what is called the SLED ARC TEST. To perform the “Sled Art Test” simply hold the XR-SERIES by it’s handle and grab hold of the back end of the XR-SERIES BASE PLATFORM and pull the base up and back until the XR-SERIES CENTRAL PO…

1, Set-up and Operations Guide Glidecam Industries, Inc. 23 Joseph Street, Kingston, MA 02364 Customer Service Line 1-781-585-7900 Manufactured in the U.S.A. COPYRIGHT 2015 GLIDECAM INDUSTRIES,Inc. ALL RIGHTS RESERVED MANUAL GLIDECAM XR-SERIES XR-1000 / XR-2000 / XR-4000 …