JLG LiftPod FS80 Operation, Safety, Service And Maintenance Manual

36, JLG LiftPod FS80 SECTION 3 - MACHINE OPERATION 1001070451 LIFTPOD by JLG 1-877-254-3876 3-8 www.liftpod.com 1-877-2-LIFTPOD 7. Place the powerpack (optional equipment) against the platform uprights, closest to the mast, and slide it down until it clicks, indicating it is fully seated (see Figure 3- 10.…

73, SECTION 6 - SERVICE AND MAINTENANCE 1-877-254-3876 LIFTPOD by JLG 1001070451 1-877-2-LIFTPOD www.liftpod.com 6-7 Table 6-1. Preventative Maintenance & Inspection Schedule General Pre-Start Inspection Pre-Delivery or Frequent Inspection Annual (Yearly) Inspec- tion 5 Year Inspect…

79, SECTION 6 - SERVICE AND MAINTENANCE 1-877-254-3876 LIFTPOD by JLG 1001070451 1-877-2-LIFTPOD www.liftpod.com 6-13 b. Ropes must be parallel going into and through the carriage, looking down the mast. 3. Rope Loose In normal operation the rope is always taut and should never come …

8, TABLE OF CONTENTS SECTION - PARAGRAPH, SUBJECT PAGE SECTION - PARAGRAPH, SUBJECT PAGE 1001070451 LIFTPOD by JLG 1-877-254-3876 ii www.liftpod.com 1-877-2-LIFTPOD Powerpack Control Console (Optional Equipment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13 Elevating . . . . . . . .…

46, SECTION 3 - MACHINE OPERATION 1001070451 LIFTPOD by JLG 1-877-254-3876 3-18 www.liftpod.com 1-877-2-LIFTPOD Fully Assembled Maneuvering There are two ways to move the assembled machine: PUSHED UPRIGHT The machine can be pushed around using the built-in wheels and castor. The floor is required to be…

27, SECTION 2 - PREPARATION AND INSPECTION 1-877-254-3876 LIFTPOD by JLG 1001070451 1-877-2-LIFTPOD www.liftpod.com 2-9 Tool Tray Pre-Start Inspection Prior to use of the tool tray, check the following: • Tool tray is seated securely on the platform rail. • No cracks or bends in tray.…