Fimco 200-3PT-1PC-TSC Owner's Manual

1, Fimco 200-3PT-1PC-TSC Page 1 General Information Thank you for purchasing this product. The purpose of this manual is to assist you in operating and maintaining your 3-Point Sprayer. Retain a copy of your receipt for your unit, as it will be required to validate any warranty service Products are warranted ag…

5, Page 5 Exploded View: 200-3PT-1PC-TSC (2152285) Refer to the parts list next page for part numbers. …

3, Page 3 A torque chain, ‘S’ hook, nut and bolt are included in this assembly to secure your pump during operation. 1. Attach one end of the torque chain over the threaded stem of the bolt 2. Thread the whiz nut onto the bolt. Hand-tighten 3. Thread the bolt, chain and nut ‘pre…

10, Page 10 Warranty LIMITED WARRANTY FOR NEW FIMCO, INC. WHO MAY USE THIS LIMITED WARRANTY. This limited warranty (the “Limited Warranty”) is provided by Fimco, Inc. to the original purchaser (“you”) of the Equipment (as dened below) from Fimco, Inc. or one of Fimco, Inc.’…

8, Page 8 The AIXR TeeJet Flat Spray Tip offers the benefits of obtaining excel- lent drift resistance without compromising spray coverage. Tips produc- ing very coarse droplets do minimize drift but do not provide the same surface coverage as tips that produce smaller droplets.…

6, Page 6 Parts List: 200-3PT-1PC-TSC (2152285) Back Rack Assembly (5277359) NOTE: Assembly of opposite end is similar to this end. Bolt (Item 8) goes through the yoke on the outer boom (s), then through Item 12 and 15, followed with jam lock- nut (Item 3). For the eyebolt, thread t…