Dynapac PL 500/20 S Operation & Maintenance Manual

120, D 80 D PL500/20S.GB 80-116 - 04.07 - Insert ignition key (5) in ignition lock in setting „P“. When starting, ensure that the light is not switched on in order to save the battery. - Switch on ignition (Pos. 1). - Turn ignition key in Pos. 2 to start the diesel engine.  Before starting, sound…

197, F 37 F PL500/20S.GB 37-74 - 04.07 Oil change $ Always perform oil changes with the oil at operating temperature, immediately after the gearbox comes to a standstill. This ensures that suspended particles of solid matter do not have time to settle and form sediment.  Wear protec…

12, A 2 A PL500/20S.GB 2-2 - 04.07 Technical modifications, attachments and conversions: The cold planer may on- ly be operated with the extension parts, optional equipment and accessories, protec- tion and safety devices authorised by the manufacturer as well as the setting values specified b…

225, F 65 F PL500/20S.GB 65-74 - 04.07 9 Maintenance log To keep a proper record of all maintenance, service and repair work, please use the pre-printed forms on the following pages. Notes on how to fill in the maintenance logs properly: e.g.: 9.1 Assembly, engine, engine systems e.g.: 9.6 Assembly, …

117, Dynapac PL 500/20 S D 77 D PL500/20S.GB 77-116 - 04.07 Checklist for machine operator Once the maintenance and checking work listed in the maintenance manual has been conducted at the specified intervals, the inspections and control work listed in the fol- lowing list should also be noted and conducted. This work is u…

100, D 60 D PL500/20S.GB 60-116 - 04.07 LED display The LED‘s are only used to provide the operator with a better display of the status of each of the activated valve outputs. Its display is simply an enlarged and detailed depiction of the function of the arrow symbols on the LC display. The LE…