Fisual UPA-1000 Operation & User’s Manual

1, Fisual UPA-1000 USB Phono Pre-Amplifier Thank you for purchasing the UPA-1000 phono pre-amplifier, before use we recommend you read the following instructions and retain them for future reference. The UPA-1000 is designed to allow you to playback and record your vinyl collecti…

2, What’s in the box ● UPA-1000 pre-amplifier unit ● USB A -> Mini USB B cable ● Phono (RCA) audio cable ● 3.5mm jack audio cable Usage (PC capture / playback from turntable) 1. If your turntable is does not have a cable, connect the supplied RCA audio cable fro…

3, Usage (Analogue pre-amplifier / playback from turntable) 1. If your turntable is does not have a cable, connect the supplied RCA audio cable from the output of your turntable to the Phono In connection on the UPA-1000. 2. Toggle the MM/MC switch on the unit to the correct setting for you…

4, Fisual UPA-1000 Usage (PC Capture / Line-in) 1. Connect a source device (eg. CD Player / Tape etc) using a suitable cable to the Line In/Pre-Amp Out port on the UPA-1000. 2. Toggle the switch on the unit to select Line-in. 3. Connect the supplied USB cable from the pre-amp to an available…

5, Troubleshooting Computer does not detect UPA-1000 ● Check PC is running a compatible OS. ● Ensure USB connections are firmly in place. ● Check USB is capable of supplying 500mA. ● Disconnect then re-connect the USB cable. ● Check auto-detection light (when detect…