Galcon Dc-1 Operating Instructions Manual

20, Galcon Dc-1 20 The irrigation window function is incorporated in the "S" series of professional controllers. The irrigation window is an advanced feature which enables you to define that the operations in a cyclical irrigation program (see Section 4.2) be performed during a specified part of the day …

22, 22 7. Maintenance, Troubleshooting and Repairs • Batteries should be removed if the irrigation controller is not going to be used for a lengthy period. The programs will disappear when removing batteries. Again reprogram the controller. • A filter must be installed upstream of the va…

7, 3. Programming the Irrigation Controller This section describes the programming steps for a simple irrigation schedule. It is followed by a section dealing with more advanced irrigation controller operations. T he irrigation controller is programmed with the aid of 4 buttons: Programming Step …

3, 2. Setting up the Irrigation Controller 2.1Valve and Solenoid Assembly 2.1.1 Shut the main irrigation system valve. 2.1.2 Install the hydraulic valve in the irrigation system. Important! It is recommended that you do not disassemble the solenoid. 1 2 3 4 5 6 8 7 Water Flow Dir…

16, 5.2 Blinking Low Battery Warning When the batteries are low, a blinking battery icon appears on the display. In this state, the batteries still enable valve operation, but must be promtly replaced. After replacing the batteries, press any button to resume irrigation controller operation. …