Elkay LBWD00XXC Installation, Care & User Manual

11, (630) 574-8484 9 Elkay Manufacturing Company 1000005232 (Rev. A - 04/19) Built-in Filtered Water Dispenser NOTICE It is recommended to attach the front cover with the top two mounting screws to prevent it from falling away from the water dispenser while the lter unit is b…

18, Elkay Manufacturing Company 16 (630) 574-8484 Built-in Filtered Water Dispenser 1000005232 (Rev. A - 04/19) 12. Check the lter status light. If the red light is blinking the lter is installed incorrectly. A steady blue light indicates the lter is installed properl…

9, Elkay LBWD00XXC (630) 574-8484 7 Elkay Manufacturing Company 1000005232 (Rev. A - 04/19) Built-in Filtered Water Dispenser 4.4 Mounting Height Dimensions 1. The suggested water dispenser mounting height to the center of the water dispenser sensor (D) is 47 inches (1194 mm). This height can be ad…

16, Elkay Manufacturing Company 14 (630) 574-8484 Built-in Filtered Water Dispenser 1000005232 (Rev. A - 04/19) 4. Place a container under the water dispenser spout to activate the ll sensor and dispense at least one gallon of water to bleed off any trapped air from the supply l…

14, Elkay Manufacturing Company 12 (630) 574-8484 Built-in Filtered Water Dispenser 1000005232 (Rev. A - 04/19) 7. Thread the strainer into the drain adapter. Tighten the connection to create a watertight seal. 8. Attach one end of the 3/4 inch exible drain hose to the 3/4 inch b…