Elite Power PFC Series Operation & User’s Manual

2, 2. Technical Parameters 2.1 Specifications Model: PFCXX-YY (XX: Output Voltage, YY: Output Amps) Power factor: ≥99% Efficiency: ≥92% Input voltage range: AC 85 ~ 242V Frequency range: 45 ~ 65Hz Communication: CAN and 12V Digital Input 2.1 Operating Environm…

7, If both the CAN communication and the digital inputs are connected CAN communications will take priority over the digital input for charge control. CAN communications requires the optional CAN board be installed on the EMS CPU. …

9, Elite Power PFC Series If charger does not display any LED’s when plugged in and charging does not occur the fuse may be blow. Unplug the charger from the battery pack and AC line and check the fuse by unscrewing the cap with a #2 Philips screw driver. If the fuse is blown replace with an equivale…

1, User Manual for PFC Series Charger 1. Overview The PFC series chargers are suitable for charging lithium ion battery packs such as those used in electric vehicle applications. The PFC series chargers are designed to work seamlessly with Elite Power Solutions’ Energy Management…

5, 5.3 CAN and Digital Input Controls A five wire connector connects to the charger for interfacing with the BMS. Three wires have a white connector attached, these three wires are the CAN interface. The other two wires are labeled “+ 12V” and “- 12V”, these wires a…

3, Over Voltage Protection: Red light blinking, 100% lights on BMS alarm/charging interruptions All LED’s blinking 3.2 Charging Status Indication Shutdown status: Six lights blinking Charging stage: Percent light indicating pack voltage vs. max charg…