Altec SIREX Installation Manual

1, NOTINS0UK000025-V1.04 INSTALLATION GUIDE Outdoor siren self-powered Made in FRANCE SIREX SIREX-F SIREX : siren without FLASH SIREX-F : siren with integrated FLASH SIREX and SIREX-F are admitted to NF and A2P « 3 shiel…

2, 2 INTRODUCTION You have just bought the outdoor siren self-powered SIREX of the range ALTEC. Many thanks. Designed to last, Sirex comes in a moulded case made of cast aluminium with polyester paint to the test of time. SIREX-F includes an alarm light with LED technology ultra …

3, 3 1 Voltage level TBTS (Very Low Safety Voltage) 2 Removal tamper 3 Speaker 4 Backup battery 5 Direct power 6 OV power 7 Power supply with current limiting battery 8 Input + blocking siren 9 Input + blocking to place the sign M/A 10 Tamper circuit All the conne…

4, Altec SIREX 4 INPUT I/O Configurations for input I/O Signal On / Off Only flash Signal On / Off Flash and ringing beeps low volume Signal On / off Flash and ringing beeps strong volume Input I/O used as remote separate for flash The signal set ON or OFF of the alarm s…

5, 5 INSTALLATION SIREX is fixed on a vertical wall and flat surface greater than that of its box, leaving at least 2cm on each side. Drill the mounting holes according to the drilling template, and then attach first the plastic plug-shaped on the wall. Then place the chassis o…

6, 6 DESTRUCTION OF THE PRODUCT As required by the WEEE (Waste Electrical and Electronic Equipment), electrical and electronic equipment must be disposed separately from normal household garbage to promote the reuse, recycling and other forms of recovery, as well as limit the…