ALTAI IX500 Quick Setup Manual

13, ALTAI IX500 13 Altai Technologies Ltd. All rights reserved Quick Setup Guide 4. Connect with Cloud-Based Controller – AltaiCare Network Scenario: 1. You can manage your IX500 and set up hotspot service for the subscribers with AltaiCare, which is a cloud-based system. 2. Go to…

6, 6 Altai Technologies Ltd. All rights reserved Quick Setup Guide Option 2: Wall Mount (Concrete Wall) 1 Determine where the AP is to be placed and mark location on the wall surface for the two mounting holes of the mount base. Use an ap…

4, 4 Altai Technologies Ltd. All rights reserved Quick Setup Guide Ethernet Port, DC Power Jack and Reset Button Ethernet Port: It is used to connect to power source (see the Power Options in the later section) and provides 10/1…

2, 2 Altai Technologies Ltd. All rights reserved Quick Setup Guide Introduction Thank you for purchasing the ALTAI IX500 product. This guide provides instructions to install the product and set it up as AP with minimal effort. Package Contents Ceiling Mou…

7, 7 Altai Technologies Ltd. All rights reserved Quick Setup Guide Option 3: Pole Mount (For 1 inch to 3 inches of pole diameter) 1 Thread the open end of the cable tie through the two slots of the mount base. 2 Slide the base into the slot…