ARRI ARRIFLEX 16S Operating Instructions Manual

10, Standard Matte Box and Filter Holder To attach the matte box to the camera, slide the end of the boom into the special shoe (19) on the front of the camera housing. Lock it into position by turning the knurled (44) knob at the front of the boom. The rear stage of …

22, By observing the following "DON'Ts” you will protect the continued safe and reliable operation of your Arriflex: DON'T run camera without film at high speeds. DON'T attempt to disassemble any part of the camera. This should be done by factory-trained p…

2, 1 Film Magazine (200 ft.) 2 Magazine Cover Lock 3 Latch for Magazine Lock 4 Camera Cover Lock 5 Diopter Adjustment Ring 6 Eyepiece Retaining Ring 7 Lock for Diopter Adjustment 8 Power Cable Lock 9 Override Button for Buckle Switch 10 Camera “ON” Switch 11 Camera ”OFF” …

5, ARRI ARRIFLEX 16S Arriflex 16S Operating Instructions Each Arriflex 16 S/B is SUPPLIED WITH: 1 Test film taken with camera 2 Plastic skewer for cleaning emulsion from film gate. 3 Bottle with special camera oil 4 Tube of special grease for lens cavities of camera and lens mounts. 5 Pressure Oi…

19, Wind sufficient film onto the take-up core to be certain It won't slip, that it will wind even and in line with the guide roller. Always be sure to remove the core adapter from the exposed roll before repacking film for the lab. Many adapters have been lost this way. Practice the Ioading wit…

4, The miniature lamp, which is visible just over the camera hand grip is paired with another lamp, located inside the camera. The inside lamp flashes whole frames of film, during camera run-up time. The result is that the beginning of each take, three or four frames of film are flashed. …