Alleswolke UCM3310S Quick Start Manual

8, 8 Insert Cable to OBD-II Port The OBD-II* port of vehicles is usually located underneath of the dashboard, please check the manual of your vehicle or consult auto specialists to locate it in your vehicle. *Smart OBD-II Power/Data Cable supports 9V-36V input and is compatible with al…

12, Alleswolke UCM3310S 12 Install Emergency Button Install the Emergency Button with the Self-Grip Strap by tying the panic button around the steering wheel firmly, or anywhere else that is firm and convenient to reach. You can also use the spare double-side sticker to mount the button on the dash…

5, 5 Mount Your System Install camera onto the camera mount, peel the protection cover from the sticker on the mount, and press the mount firmly onto the desired place of windshield or the top center of dashboard. The default lens position is facing toward to the windshiel…

3, 3 Get The App Download the free Alleswolke LTEdashcam Smartphone application to start. You may scan the QR-code and download the smartphone applications via our download guiding web page. Please follow the app’s guide to sign-up and log-in to t…

6, 6 Connect Cables 1. Connect the USB-C Cable between Hub and Camera. 2. Connect the OBD-II Power/Data Cable on the Hub’s side (Micro- USB). 3. Insert Micro SD card into the camera.* *Micro SD card is not included and needs to be purchased separat…

10, 10 System Status LED After turning on the hub, you will hear a prompt sound from camera to indicate that the system is starting. The signal LED indicator on the hub will blink for a few seconds and stay solid. If the LEDs keep blinking, please check the LED status c…