Allegion CISA MyEVO Installation And User Manual

31, - 31 - CISA MYEVO RFID READER USING THE CISA MYEVO RFID READER short sound signal  long sound signal  Multi-colour LED OK (green)  ERROR (red)  Programming LED (yellow)  The RFID reader is an accessory which is installed on the door panel and has the follow…

33, - 33 - CISA MYEVO RFID READER OPENING THE DOOR 1. Hold the card or the mini card up to the RFID reader   2. The deadbolts and latchbolt will retract and the door can be opened       If the door is not opened in 10 seconds, it will lock again. It is not possible t…

13, 67 69.6 R5 0,2 0,2 G 4B 4AC6 C5 - 13 - INSTALLATION CISA MYEVO BUTTON 06525.51 To carry out this installation, the panel must be at least 5 mm thick. 1. Make a hole in the panel, respecting the tolerances indicated in the drawing. 2. Place the bracket (4A) in the hole in the…

28, - 28 - CISA MYEVO KEYPAD DELETING ALL USER CODES  This must be done with the DOOR OPEN. 1. Press the CISA key to activate the keypad   2. Enter the 8-digit Master Code    3. Press 3   4. Enter the Master Code   CHANGING THE LOCK OPERATING MODE The loc…

12, Ø2.9x13 UNI6954 4B 4A C5 C6 42 40 Ø30 4 x Ø2,6 - 12 - INSTALLATION CISA MYEVO BUTTON 06525.50 1. Screw the plate (4A) onto the door in the direction indicated  Top-Alto on it. 2. Pass both the button cable (C6) and the BLE cable (C5) through the hole (the BLE cable is us…