Algeos OptoGait Operation & User’s Manual

27, Algeos OptoGait 25 5) All biofeedback tests can be stopped by clicking ‘Stop’. 6) After stopping the Biofeedback test, a pie chart will be displayed showing the time (and percentage) that the customer spent with the good (green), fair (orange) and red (bad) thresholds for the selected gait parameter. The thr…

25, 23 Using Biofeedback 1) To acces s Biofeedback mode, click on ‘Biofeedback’ on the top tool bar. 2) To st art a test, click one of the following test options: ‐ ‘Treadmill walking test’. ‐ ‘Treadmill running test’. ‐ ‘March in place test’. …

16, 14 14) An existing protocol (Body Sway Protocol, Single Leg 3 Hops 2D Protocol etc.) can be selected from the scroll down list labelled ‘Protocol’. …

21, 19 Managing Data 1) To access the data, click on the ‘Results’ tab on the top tool bar. 2) Select the patient data and click on the sideward arrow to move the data from the ‘Test List’ (left) to the ‘Test Analysis’ (right). 3) Clic…

3, 1 Necessary Equipment The equipment needed for a standard OptoGait set-up includes the following: The following cables are also required to operate the OptoGait system: Lemo cable (small silver cable with red dot, x1). Optional – …