Analytik Jena SPECORD S600 Operation & User’s Manual

67, Peltier-tempered accessories Heat exchanger for Peltier-tempered accessories SPECORD S600 accessories Edition 09/2014 65 1 Type plate 2 Connection to the Peltier-tempered accessories 3 Mains switch 4 Fuse holder 5 Mains connection Fig. 15-23 Heat exchanger – connections…

68, Analytik Jena SPECORD S600 Peltier-tempered accessories Heat exchanger for Peltier-tempered accessories 66 Edition 09/2014 SPECORD S600 accessories Note When placing the heat exchanger note that the maximum delivery height is approx. 1.2 m. Dependent on the location of the heat exchanger, the routing of the h…

47, Peltier-tempered accessories Peltier temperature-controlled cell holder, air-cooled SPECORD S600 accessories Edition 09/2014 45 The table in the window Cyclic temperature mode contains the temperatures to be activated, the waiting time between reaching the temperature and …

74, Automation Cartridge sipper system 72 Edition 09/2014 SPECORD S600 accessories On the tab Accessories the following configurations are carried out: Option / button Description Pump time [s] The pumping time is the time required to transport the sample optimally into the cell. To opt…

93, Analysis of light-scattering samples Integrating sphere SPECORD S600 accessories Edition 09/2014 91 20.2 Using the integrating sphere In transmittance or diffuse reflectance measurements, the sample is brought into direct contact with the sphere. In this way, the sample presents a pa…