Amprobe AT-2001 Instructional Manual

4, Amprobe Europe GmbH AT-2000 - 4 - The AT-2000 Advanced Tracing System combines both Current Tracing and Open Tracing into one versatile tool providing the ability to solve virtually all your tracing problems. Having confidence in an instrument is an important part of usin…

7, Amprobe Europe GmbH AT-2000 - 7 - Using the R2000 Receiver 1. Turn the R2000 'ON' by rotating the thumbwheel and leave it around position '5'. 2. Move the range switch to x1 (this is the least sensitive setting). 3. Place the mode switch into the appro…

21, Amprobe Europe GmbH AT-2000 - 21 - Locating Buried Conduit or Metal Pipe 1. Connect the A2201 Clamp to the T2200 transmitter and then clamp it around the conduit or pipe. 2. Use the B2024 battery or the BV2025 Converter is recommended. Plug either one into the jack on the side of …

15, Amprobe AT-2001 Amprobe Europe GmbH AT-2000 - 15 - signal on the R2000. 10. Starting from the T2200, trace the conductor. When in the 'SHORT' mode, be sure to rotate the R2000 while tracing to maintain proper orientation in case the wire changes direction. The open will be at the point you begin …

22, Amprobe Europe GmbH AT-2000 - 22 - SPECIFICATIONS General Operating Temperature: 0 to 120° F (-18°C to 49°C) Storage Temperature: -40 to 150° F (-40°C to 66°C) Case Material: ABS Case Size: 11"x15"1/2" x 4" (39.4 x 27.9 x 10.2 cm) R2000 Receiv…