Aeotec Smart Switch 6 Manual 

5, Size: 4 Byte, Default Value: 0 Setting Description 1 Report Instantaneous Voltage 2 Report Instantaneous Current (Amperes) 4 Report Instantaneous Watts 8 Report Accumulated kWh Parameter 110: Reset Parameter 111-113 Size: 1 Byte, Default Value: 0 Setting Description 1 Reset Param…

7, Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions. (c) 2019 Z-Wave Europe GmbH, Antonstr. 3, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwave.eu. The template is maintained by Z-Wave Europe G…

4, Size: 1 Byte, Default Value: 50 Setting Description 0 - 100 Brightness level range is 0 to 100%. Parameter 90: Enable/Disable the function of parameter 91 and 92. This parameter is used to Enable/Disable the function of parameter 91 and 92. Size: 1 Byte, Default Value: 1 Setting Desc…

2, network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device. Inclusion Short press the product’s Action button that you can find on the product"s housing. Exclusion Short press…

1, Aeotec Smart Switch 6 Aeotec Smart Switch 6 SKU: AEOEZW096-EU Quickstart This is a secure On/Off Power Switch for Europe. To run this device please connect it to your mains power supply. Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you …