Advent Instruments AI-7280 Dll Programmers Manual

117, Advent Instruments AI-7280 Advent Instruments Inc. CallerID Functions 3.3.4 CID_SDMF_Number Description: This function creates an SDMF calling number CallerID message based on the CallingNumber and DateTime parameters. Function Prototype: long CID_SDMF_Number (char DateTime[ ], char CallingNumb…

16, Low Level DLL Function Reference Advent Instruments Inc. 2.2.8 Waitms Description: The Waitms function pauses for the specified number of milliseconds. Note: this function uses the internal windows timer as a timing reference. Therefore, timing resolution may vary depending on c…

44, Low Level DLL Function Reference Advent Instruments Inc. isactive The isactive parameter returns a non-zero value if the AM modulator is active. The isactive parameter returns zero if the AM modulator is inactive. AI-7280 DLL Programmers Guide 40 …

84, Low Level DLL Function Reference Advent Instruments Inc. 2.14.4 Get_ACCapSamples Description: The Get_ACCapSamples function reads a block of voltage samples from the AC capture memory starting at a specified index and returns the values of the samples in the samples[] array. …

81, Advent Instruments Inc. Low Level DLL Function Reference the low frequency tone of the recorded DTMF digit. lolevel The lolevel parameter returns the level measurement (Vrms) for the low frequency tone of the recorded DTMF digit. hifreq The hifreq parameter returns the frequency measureme…

86, Low Level DLL Function Reference Advent Instruments Inc. 2.14.6 Get_ACCapIndex Description: The Get_ACCapIndex function returns the location in the AC Capture buffer where the next sample will be stored. This index value can be used to determine the position of a captured AC signal in memor…