Adaptec ASA-7211C Installation Manual

32, A-2 ASA-7211C/F Installation Guide The following table describes LED functionality for the ASA-7211F only. Label on Bracket 1 1 See the appropriate figure on page 1-3. Reference Designator Function LED Description Color 1000 DS3 Rate indictor When lit, indicates a valid GbE (…

10, 1-4 ASA-7211C/F Installation Guide System Requirements The following system requirements are discussed: ■ Hardware requirements ■ Supported iSCSI targets ■ Operating system requirements Hardware Requirements Your computer must meet the following requirements: ■ Intel Pent…

30, 4-5 Configuring Your iSCSI System Changing Your iConfig Password The default user ID is admin. The default password is adaptec. To change the default password: 1 From the Main Menu, select User Logout and Login Password. For details, see the Main Menu illustration on page 4-4. 2 Select User Pa…

26, 4-1 4 Configuring Your iSCSI System In this Chapter Now that you have installed your Adaptec iSCSI adapter and driver, you need to establish Ethernet connectivity between your adapter and your targets. Then, run iConfig and use it to configure your iSCSI system. iConfig has an easy-to-us…

29, Adaptec ASA-7211C 4-4 ASA-7211C/F Installation Guide Using Express Setup to Configure Your iSCSI Adapter Now that you have started iConfig, you are ready to run iConfig Express Setup to configure your adapter (initiator). Note: In any menu, press Esc to get back to the previous menu. When you run i…

9, 1-3 Introduction Adapter Illustrations The Adaptec iSCSI adapters are illustrated below. Note the difference in external connectors. One adapter has a copper connector; the other, a fibre connector. ASA-7211C Adapter Card ASA-7211F Adapter Card Note: Some ASA-7211 adapters are manufactu…