ACTi D7 Series Installation Manual

8, www.acti.com Installation Guide 8 3. Pull the network cable through the flex conduit. NOTE: For camera models that support external power adaptor, audio in/out, or digital input/output (DI/DO) functions, route the cables without connectors through the flex conduit together with the n…

21, ACTi D7 Series www.acti.com Installation Guide 21 Use the default IP address of a camera: If there is no DHCP server in the given network, the user may have to assign the IP addresses to both PC and camera manually to make sure they are in the same network segment. When the camera is pl…

23, www.acti.com Installation Guide 23 Access the Camera Now that the camera and the PC are both having their unique IP addresses and are under the same network segment, it is possible to use the Web browser of the PC to access the camera. You can use any of the browsers to access the…

16, www.acti.com Installation Guide 16 Step 8: Access the Camera Live View See Accessing the Camera Live View on page 18 for more information. Step 9: Adjust the Viewing Angle and Focus Based on the Live View, adjust the viewing angle and orientation of the camera. Adjustments vary …

13, www.acti.com Installation Guide 13 Step 5: Open the Dome Cover 1. Remove the plastic covering the camera. 2. Remove the metal cap covering the bottom conduit hole of the camera, and attach the cap to the side conduit hole to close it. 3. Loosen the three (3) screws sec…

11, www.acti.com Installation Guide 11 3. Screw the gland body to the mount kit. 4. Pull enough length of the network cable and other cables (if any) and insert through the mount kit to connect to the camera later. 5. Insert the sealing insert into the gland body and t…