Above All HC419V Instruction Manual

1, Above All HC419V 1. 3 Steps Dimming Control (Corridor Function) 3 steps dimming control, for some areas that require a light change notice before switch-off. It offers 3 levels of light :100%-->dimmed light ( 10%, 20%,30%,40%, 50% optional)-->off; and 2 periods of selectable waiting time: motion holdtime a…

2, 2. master-to-master control ( condomunium control ) With sufcient natural light, the light does not switch on when presence detected. With insufcient nature light, the person comes from any direction, the group of lamps switch on. After the hold time,the whole group of lamps dims to…

3, 5. ambient daylight threshold With simple operation, rapidly turn off/on the xture 2 cycles within 2 sec: 1. the green LED on the sensor ashes slowly for 5 seconds, meanwhile the xture blinks twice. 2. the daylight sensor measures and remembers the surrounding lux for…

4, Multiple sensors control the same group of ballast /driver-- Oops: do not connect the 1-10v terminals on driver X to Driver Y. DETECTION PATTERN Add: 1501 Industrial Way N, Toms River, NJ 08755 Phone: 866-222-8866 E-mail: [email protected] Web: www.AboveAllLighting.c…

5, SETTINGS 1. Detection area Detection area can be reduced by selecting the combination on the DIP switches to t precisely for each specic application. 2. Hold-time Hold-time means the time period you would like to keep the lamp on 100% after the person has left the detection a…

6, TECHNICAL DATA Operating voltage Switched power Standby power Warm time Detection area Hold time Standby period Standby dimming level Daylight threshold Sensor principle Microwave frequency Microwave power Detection range Detection angle Mounting height Operating temperature IP rating Cer…